Length ：1.95-2.05
Roughness of two slopes ：Ra0.8
Outer diameter ：Ø14.76-14.78
Outer diameter ：Ø25.32-25.34
Inner hole ：Ø10.476-10.504
Chamfering the edge of the orifice ：0.05max.
Inner hole ：Ø10.116-10.134
Inner hole roughness ：Ra0.2
Cylindricity of inner hole ：0.006
Outer diameter ：Ø10.287-10.293
Outer diameter roughness ：Rp0.45
Coating thickness ：45-55um
End face perpendicularity ：0.015
Length ：0.12士0.01
Roughness of bevel ：Rz2.8/0.006/0.015
Inner hole ：Ø4.023土0.01、Ø2.495士0.01
Concentricity of the hole ：Ø0.006
Hole surface roughness ：Ptmax10
Outer diameter ：Ø9.747+0.005
End surface roughness ：Ra0.4、Rt2
End face perpendicularity ：0.007
Length ：5.015土0.02
Outer diameter ：Ø12.018-12.036
Outer diameter ：Ø9.75+0.01/-0.02
End surface roughness ：Ra0.4、Rt2
Inner hole ：Ø4.45土0.025
Outer diameter ：Ø6.63土0.025、Ø6.484士0.025
Inner hole ：Ø5.5+0.012/-0
Outer diameter ：Ø19+0.036/+0.015
IPE Group Limited
Links
Focus on us